Qadir.Qezeljeh
Member
Can someone help me about using S7-300 CPU's for redundant application for example 315C-2DP or other kinds.
thank you
thank you
Redundancy in S7-300
- Thread starter Qadir.Qezeljeh
- Start date
Hi,
You will need to use software to achieve redundancy. The S7400 platform supports redundancy at a hardware level...
Search the forum - there are several posts on this already (i have posted a couple myself).
Regards,
Rob
You will need to use software to achieve redundancy. The S7400 platform supports redundancy at a hardware level...
Search the forum - there are several posts on this already (i have posted a couple myself).
Regards,
Rob
Similar Topics
Hello!
I haven't worked with software redundancy before, so I was wondering if I could use the CP343-1 Lean modules (which I'm using for the...
Dear Experts,
I am working on a system with S7-300 software redundancy due to high availability requirements of the control logic. My question...
I am having a problem with an S7 300 and the redundant connection. Everything has been working fine until I changed the config on the analogue...
Anbody ever used S7300 with the software redundancy blocks FC100, FB101 etc? I am told that the declaration of IEC timers and associated DB's...
Hey Ladies and Gents,
I'm new to PLCS.net and have a problem with working with the software redundancy of Siemens.
What I have:
2 - 315-2...