Hopefully this is allowed here as this isn't really a PLC but I've seen some people posting about it in the past that seemed to know this machine pretty well.
To cut a very long story short, currently we have a ROC controlling two meters, a master meter for high volume proving and then a small volume prover as well.
In order to initiate these proves (without HMI/PLC as requested by customer), we have set up FSTs to change the proving type between the master meter and the SVP. Going into a soft point and changing a 1 to a 0 changes the proving method.
I'm wondering if there is any way to automate this within Roclink or to simplify it for techs who are not handy with Roclink. I understand that an HMI/PLC would do this very easily but, well, sometimes the customer doesn't want the easy way for...some reason.
To cut a very long story short, currently we have a ROC controlling two meters, a master meter for high volume proving and then a small volume prover as well.
In order to initiate these proves (without HMI/PLC as requested by customer), we have set up FSTs to change the proving type between the master meter and the SVP. Going into a soft point and changing a 1 to a 0 changes the proving method.
I'm wondering if there is any way to automate this within Roclink or to simplify it for techs who are not handy with Roclink. I understand that an HMI/PLC would do this very easily but, well, sometimes the customer doesn't want the easy way for...some reason.