Rockwell AOI ouputs

[Mr_3D_Print]

Working with AB/ Rockwell PLCs
How do I get certain outputs to show up like the picture ? The one in the picture was made by a manufacturer, but all the AOIs I personally make are always a single block. Not sure what I'm missing in the configuration.
I've been trying to figure this out for months !
Thank you.

 

[cardosocea]

Right click on the AOI, select properties, go to parameters tab, check the column called visible. Re-download.

 

[Mr_3D_Print]

Right click on the AOI, select properties, go to parameters tab, check the column called visible. Re-download.

I tried that but just a big rectangular block ?

 

[tarik1978]

Uncheck req and check visual for status tags

 

[Mr_3D_Print]

Yesss that worked. Thanks.