MarkNightingale
Lifetime Supporting Member + Moderator
Hi,
I am using RS View to do quite a large project, so I am using pop ups for all my valves and pumps etc.
This means I have to use parameter files to populate these pop ups with the relevant information.
When I am adding the tags to the parameter file I am basically copying and pasting from the offline tag file. However I've noticed that some tags have :: in front while others don't.
I dont want to do the 200 odd valves and find out that I have got to go back to put :: in front.
I have given an example below.
#11 = ::[Saudi]N16:4
#14 = [Saudi]N77:32
Thanks In Advance
Mark
I am using RS View to do quite a large project, so I am using pop ups for all my valves and pumps etc.
This means I have to use parameter files to populate these pop ups with the relevant information.
When I am adding the tags to the parameter file I am basically copying and pasting from the offline tag file. However I've noticed that some tags have :: in front while others don't.
I dont want to do the 200 odd valves and find out that I have got to go back to put :: in front.
I have given an example below.
#11 = ::[Saudi]N16:4
#14 = [Saudi]N77:32
Thanks In Advance
Mark