Has anyone tried DF1 with the RS232 to TCP servers? RS232 to TCP WIFI servers? Curious if anyone has had any luck. I'm thinking of trying it with an SLC 5/04 with RSlinx Gateway version. There are boards from Mousers.com for about $30 each.
I have a 5/04 that will be pulling 8 temp readings, 1 humidity reading and 3 analog values from a pic style board. I actually have 3 of these boards and will use them all on the same wire for a serial style communication with a device ID for each. The values will be sent from 1 TTL out on each board to a TTL input on the 5/04.
I would like to be able to program the 5/04 over the RS232 to tcp and also communicate between a HAKKO 606 touch panel and the 5/04 via the same style interface. The HAKKO will then display the data polled from the mini board. I realize I could just buy an analog card for the 5/04 or the 1794 rack but where's the fun in that?
I have a 5/04 that will be pulling 8 temp readings, 1 humidity reading and 3 analog values from a pic style board. I actually have 3 of these boards and will use them all on the same wire for a serial style communication with a device ID for each. The values will be sent from 1 TTL out on each board to a TTL input on the 5/04.
I would like to be able to program the 5/04 over the RS232 to tcp and also communicate between a HAKKO 606 touch panel and the 5/04 via the same style interface. The HAKKO will then display the data polled from the mini board. I realize I could just buy an analog card for the 5/04 or the 1794 rack but where's the fun in that?
Last edited: