RS232 (DH485) to DF1

This updates the firmware and enables comm via rslinx over DF1 but ML1000 to PV550 over DF1 doesn't work
 
Ken Moore said:
Here's an Excel spread sheet of AB cables, I downloaded it somewhere, don't remember where though.

That is a very extensive list, is there another file that has the pin-outs for the more common PC <-> Device cables?

Sometimes, it can be quicker to make the cable, than wait for the specific cable to be ordered and supplied.
 

Similar Topics

need to set up to load applications to the PV1000 RS232/DH485 thru a SLC 5/04. Laptop is usin a PCMK to the DH+ on the SLC and the SLC is...
Replies
6
Views
1,802
Hello Everyone. I have converter USB to DH485 (1747-UIC). I have problem with RS485(DH485) - RJ45 port. (manual switch is ON to RS485/DH485) i...
Replies
3
Views
3,156
I have an SLC 500 and was wondering if I installed a 1747-KE modual and then ran the RS232 Port to my comunication server am I heading in the...
Replies
3
Views
1,811
i have a communication problem with four SLC 5/3 connected to each other by DH485 and with PC through converter by RS232 but i want to get the...
Replies
3
Views
2,162
Dear Folks, I have to trouble shoot a panel which have one SLC 5/03 PLC and one PV550. I can communicate with SLC 5/03 using USB to RS-232. But...
Replies
5
Views
4,727
Back
Top Bottom