ascot01
Lifetime Supporting Member
I just installed RSLogix ver. 7.00.00 on a Dell laptop along with RSLinx Classic Lite. When I try to configure a driver for the AB 1747-PIC A (DH-485) module, I get this error:
"Cannot create new PIC device when RSLinx is running as a service. To create a new PIC device, run RSLinx Classic as a normal application and then create the device."
I went into sevices and changed RSLinx from 'Automatic' to 'Manual' but that didn't work.
I'm trying to connect to a SLC 5/03.
I'm new at setting up drivers with RSLinx but it seems straightforward.
Any suggestions are appreciated.
"Cannot create new PIC device when RSLinx is running as a service. To create a new PIC device, run RSLinx Classic as a normal application and then create the device."
I went into sevices and changed RSLinx from 'Automatic' to 'Manual' but that didn't work.
I'm trying to connect to a SLC 5/03.
I'm new at setting up drivers with RSLinx but it seems straightforward.
Any suggestions are appreciated.