TheWaterboy
Lifetime Supporting Member + Moderator
I have started a cellular modem network to supplement/replace our Serial radios. First time working on these in real life.
I have the cellular Radios working to the point where I can ping and get to the remote PLC's webpage with no problem, but I cant get RSLinx to connect to it.
NAT is involved so the end PLC is always the same IP 10.10.x.250. The modem IP's are unique 172.68.x.x and is what I point RSLinx or my browser to. The Modem NATs traffic from there to the PLC.
Will RSLinx have a problem with this? It sure seems to, throwing Error 701-8004250B
Deleted the Harmony files already, that's just normal anymore. and I have tried to reset the path in the project but the set and clear path buttons don't enable.
I have the cellular Radios working to the point where I can ping and get to the remote PLC's webpage with no problem, but I cant get RSLinx to connect to it.
NAT is involved so the end PLC is always the same IP 10.10.x.250. The modem IP's are unique 172.68.x.x and is what I point RSLinx or my browser to. The Modem NATs traffic from there to the PLC.
Will RSLinx have a problem with this? It sure seems to, throwing Error 701-8004250B
Deleted the Harmony files already, that's just normal anymore. and I have tried to reset the path in the project but the set and clear path buttons don't enable.