DamianInRochester
Lifetime Supporting Member
I have serveral PCs all running RSLinx. Once I set the driver as Ethernet or EthernetIP and start the driver, it always automatically discovers all the devices on the network.
Doing exactly the same with a customers PC, Auto Discover will not work. I can establish connection by selecting "add device" and explicitly typing in the IP address. All firewalls are off. All antivirus are off. The first three octets of the PCs and all devices on the network match.
Has anyone else experienced this issue?
Doing exactly the same with a customers PC, Auto Discover will not work. I can establish connection by selecting "add device" and explicitly typing in the IP address. All firewalls are off. All antivirus are off. The first three octets of the PCs and all devices on the network match.
Has anyone else experienced this issue?