ohnedich6
Member
All,
I've done a search on this but did not have any luck, but if I have overlooked a topic on this by all means let me know.
I am a little stumped on a bit of logic that i am attempting to write using RsLogix/Studio 5000 v24. I am writing some Sequences, using the tag Seq_Test (DINT), where i am performing MOV instructions after certain is True to increment my Seq_Test tag. Some of this logic contains delays between steps of varying times (1s, 3s etc.).
What I am wanting to do is use one Timer and move in a predefined Preset value depending on what the needed Preset is based upon the Step that my logic is in. If i make a Sequencer that only has delays in the steps, the delay in the first step operates correctly but once it finishes it "blows" through the rest of the code and stops at the last step.
I've attached a JPEG of the sample logic I am working with. Thank you for your help.
-Nathan
I've done a search on this but did not have any luck, but if I have overlooked a topic on this by all means let me know.
I am a little stumped on a bit of logic that i am attempting to write using RsLogix/Studio 5000 v24. I am writing some Sequences, using the tag Seq_Test (DINT), where i am performing MOV instructions after certain is True to increment my Seq_Test tag. Some of this logic contains delays between steps of varying times (1s, 3s etc.).
What I am wanting to do is use one Timer and move in a predefined Preset value depending on what the needed Preset is based upon the Step that my logic is in. If i make a Sequencer that only has delays in the steps, the delay in the first step operates correctly but once it finishes it "blows" through the rest of the code and stops at the last step.
I've attached a JPEG of the sample logic I am working with. Thank you for your help.
-Nathan