RSLogix5000 and Intouch Simulation

meghnesh

Member
M
Join Date
Jan 2011
Location
Gujarat
Posts
82
Hi.

A Quick query.

I have a RSLogix 5000 PLC backup from site.
I have Wonderware Intouch SCADA backup from site.

Now I wanted to perform testing simulating RSLogix 5000 tags and observing changes in Intouch.

How can I do this ?

Please suggest a possible way to perform simulating testing.
 

Similar Topics

J
comms problem between rslogix5000 and intouch
Hi im having some trouble when comunicating between intouch and the plc. I have around 4000 tags . Some times it works fine but other it doesnt...
Replies
12
Views
4,721
widelto
widelto
N
RSLogix5000 Software Install
Hi! So my problem is a little funky, I had Studio 5000 v 24 and 30 installed, but forgot to install RSLogix (which I cannot go without). Is there...
Replies
2
Views
124
NewPLCuser2024
N
R
Odd request RSLogix5000 - Send 80 character string from One PLC to another with I/O
So I had an odd request from a customer for the above. I have written the logic and tested it all in one PLC with only using 7 outputs and 7...
2
Replies
15
Views
428
drbitboy
drbitboy
B
Adding emulator PLC to existing RSLogix5000 project
Hello everyone, I have an RSLogix5000 project which is running live in the factory but I need to make some changes to the logic. I want to test...
Replies
0
Views
1,125
BlindeBandiet
B
G
RsLogix5000 GSV Variable
Good Morning Everyone, I'm looking to use the GSV instruction to get I/O fault codes for my project so I know if there's a comms issue in my E/IP...
Replies
5
Views
872
JeremyM
JeremyM
Back
Top Bottom