I am running RSView32 on multiple computers in a production facility. There are a total of five computers, each running the same project file, except for loading different macros to handle a single monitor or dual monitor computer. A couple of the machines have RSView32 Works installed and a couple of them have the runtime only installed. I have been updating the project and loading it to all of the computers. Four of the machines run Windows 7 as the OS and one runs Windows XP as the OS. There is one machine that has been having wireframing on SOME tags on SOME screens. This has generally been resolved by rebooting that machine. I am not using OPC or DDE. The project file was setup to use a direct communications driver to a PLC-5/80. All five RSView32 stations communicate to this single PLC using a direct driver for the RSView32 node. It appears that all of the tags are set to Scan Class A, which has a foreground period of 1 sec and a background period of 5 sec. Has anyone had any similar issues? If I have not explained enough of what is going on I can get more info. There is a Professional Version of RSLinx OEM running on the computer where some of the tags wireframe in RSView32. Since I am using a direct driver to the PLC5/80E, there is no DDE topic setup in RSLinx. Apparently this system has been running as it is for a few years, and I am only hearing about the wireframing issue now. I have yet to find a link between updating the project and the start of these problems.
Last edited: