ganesh.gholap
Member
I want to configure EM 221 DC module to CPU 226. I want to trouble-shoot about the connection to expansion module. will anyone help me.
Ganesh Gholap
Ganesh Gholap
S7-200 plc
- Thread starter ganesh.gholap
- Start date
You not have to configure adresses to EM221 expansions module, the i or q adress is the next number after ones on the CPU unit. See this link for more informations
http://support.automation.siemens.c...lib.csinfo&lang=en&objid=24122845&caller=view
http://support.automation.siemens.c...lib.csinfo&lang=en&objid=24122845&caller=view
Similar Topics
Hello, I have a question about an encoder that has absolute measurement. Specifically, it's the Lika SMA5, which I would like to connect...
Hello, I have a question about an encoder that has absolute measurement. Specifically, it's the Lika SMA5, which I would like to connect...
HI i would like to know how to get a variable that will store the amount of times a program has been executed. The issue is I have 3 DBs for 1 FB...
Hi. I’m trying to upload program from existing PLC S7-1200. Create new project in TIA v15.1 then upload. After upload successfully, go online but...
Hi Guys, I am trying to establish communication over profinet between Siemens S7-1200 PLC as IO device and codesys plc as IO controller. But I am...