Our customer has got a textile machine that s7-300 315-2 dp was running.It defected a new one bought.I changed cpu in hardware configuration.Everythings are okay but when I want save and compile this configuration error messages come.
First:
Save and Compile
''The system data could not be recreated because the configuration is inconsistent.''
After that when I press ''Details'' button
Save and Compile
Master ''(2)DP'' can not operate slave ''(xx) MASTERDRIVES CBP''
Old cpu:6ES7316-2AG00-0AB0 V.1.2.0
New cpu:6ES7315-2AH14-0AB0 V.3.0.3
PS:There are a lot of ET200 stations on hardware configuration but only invertors side problem.Is there any solution?thanks...
First:
Save and Compile
''The system data could not be recreated because the configuration is inconsistent.''
After that when I press ''Details'' button
Save and Compile
Master ''(2)DP'' can not operate slave ''(xx) MASTERDRIVES CBP''
Old cpu:6ES7316-2AG00-0AB0 V.1.2.0
New cpu:6ES7315-2AH14-0AB0 V.3.0.3
PS:There are a lot of ET200 stations on hardware configuration but only invertors side problem.Is there any solution?thanks...