nehe bhimaji
Member
Hi All
Require Help Urgently
My Client Has S7 300 Plc & Lenze Drive On Profibus Network
The Drive Having Dp Adress 40 Has Been Damaged We Have Replace
The Drive With Same Type Number & Set Dp Adress As 40.drive Is Detect On Profibus Network.we Dont Have Original Drive Backup.machine Oemhas Provide The Original Lenze Drive Backup(dp Adress 40)we Tried To Download It By Lenze Drive Software(global Drive Control 4.9)but Download Was Unsuccessful.we Have Feed The Parameters Manually,by Drive Keypad.
Our Problem Is Drive Is Detected On Profibus But No Data Exchange Between Plc & Drive. So Drive Is Not Accepting Commands.
We Dont Know If Any Parameter Of Drive May Be Missing
Here Is Attachment In Pdf Form.
1.drive Parameter List(oem Provided)
2.system Network Configaration
Plz Help As Early As Possible What Should Do
Warm Regards
Nehe
Require Help Urgently
My Client Has S7 300 Plc & Lenze Drive On Profibus Network
The Drive Having Dp Adress 40 Has Been Damaged We Have Replace
The Drive With Same Type Number & Set Dp Adress As 40.drive Is Detect On Profibus Network.we Dont Have Original Drive Backup.machine Oemhas Provide The Original Lenze Drive Backup(dp Adress 40)we Tried To Download It By Lenze Drive Software(global Drive Control 4.9)but Download Was Unsuccessful.we Have Feed The Parameters Manually,by Drive Keypad.
Our Problem Is Drive Is Detected On Profibus But No Data Exchange Between Plc & Drive. So Drive Is Not Accepting Commands.
We Dont Know If Any Parameter Of Drive May Be Missing
Here Is Attachment In Pdf Form.
1.drive Parameter List(oem Provided)
2.system Network Configaration
Plz Help As Early As Possible What Should Do
Warm Regards
Nehe