Hello!
While I commisioned and download program to Simatic S7 CPU 314, i have got a next error (read from diagnostic buffer of module), and SF red led is lightning
Can you give me advice where may be the problem please?
My configuration is CPU 314 with 96kb card, SM321 DI32x24V (two modules), SM322 DO 16xDC24V/0.5A, and SM331 AI 8x13bit.
Here is c/p form diag.buffer:
Diagnostic buffer of module CPU 314
Order No./ Description Component Version
6ES7 314-1AG13-0AB0 Hardware 2
- - - Firmware V 2.6.3
Boot Loader Firmware expansion A 0.21.0
Rack: ---
Slot: ---
Event 1 of 74: Event ID 16# 49A4
STOP: inconsistency in the configuration data
occurred when checking Parameters for internal consistency
No consistency entries assignable
Error type: parameter field incomplete
Previous operating mode: STARTUP (warm restart)
Requested
operating mode: STOP (internal)
External error, Incoming event
10:29:25.648 AM 10/25/2007
While I commisioned and download program to Simatic S7 CPU 314, i have got a next error (read from diagnostic buffer of module), and SF red led is lightning
Can you give me advice where may be the problem please?
My configuration is CPU 314 with 96kb card, SM321 DI32x24V (two modules), SM322 DO 16xDC24V/0.5A, and SM331 AI 8x13bit.
Here is c/p form diag.buffer:
Diagnostic buffer of module CPU 314
Order No./ Description Component Version
6ES7 314-1AG13-0AB0 Hardware 2
- - - Firmware V 2.6.3
Boot Loader Firmware expansion A 0.21.0
Rack: ---
Slot: ---
Event 1 of 74: Event ID 16# 49A4
STOP: inconsistency in the configuration data
occurred when checking Parameters for internal consistency
No consistency entries assignable
Error type: parameter field incomplete
Previous operating mode: STARTUP (warm restart)
Requested
operating mode: STOP (internal)
External error, Incoming event
10:29:25.648 AM 10/25/2007