coman93
Member
Hello, I am trying to solve a mysterious problem that is occurring with a 300 S7 processor. I am fairly new to Seimens, I am a AB guy, and have the task of solving an issue that has arisen. A simple bit of code was built involving inline coils and a NOT gate. All logic up to the NOT gate is fine, however, the logic behind it is not correct. I have read over some help files, and the use of the inline coils are against some exceptions for programming but there is a duplicate program running on another piece of equipment that is solving for the logic correctly. I am attaching a zip of the FB network if I can obtain some help.
Thanks
Thanks
Last edited: