I have an M241 connected in Ethernet to a HMIS5T panel and I can't get them to communicate
I'm using Machine Expert 1.2
On the controller the Ethernet port has a fixed IP and shows that it has the Machine Expert protocol active.
The panel's Ethernet port has a fixed IP
In Vijeo Somachinenetwork01 it has three objects:
SOM_HMIS5T
SOM_MyController with the node name of the CPU
SomachineEquipment01 with the node name of the CPU
Compiling and downloading are done without errors
I'm using Machine Expert 1.2
On the controller the Ethernet port has a fixed IP and shows that it has the Machine Expert protocol active.
The panel's Ethernet port has a fixed IP
In Vijeo Somachinenetwork01 it has three objects:
SOM_HMIS5T
SOM_MyController with the node name of the CPU
SomachineEquipment01 with the node name of the CPU
Compiling and downloading are done without errors