amorris
Member
I have a Schneider Electric PLC (M421) & an ABB IRC5 robot controller. I'm starting this thread to see if there is anyone that can advise me on an approach...
My intention is to use an Anybus (AB7669) gateway to communicate between these two controllers. This is my first project dealing with these parts so I'm looking for a little advice/documentation on establishing a communication path.
Thank you.
My intention is to use an Anybus (AB7669) gateway to communicate between these two controllers. This is my first project dealing with these parts so I'm looking for a little advice/documentation on establishing a communication path.
Thank you.