Hi,
I use a Magelis XBT-N410 (master) to edit alarms from 2 Twido-PLC's (slave 1 and 2) in a Modbus-network. I use the [F1] function-button on the XBT-N410 to reset an alarm in the first PLC (slave 1 contains the dialog table and an alarm table). How can I use the same [F1] to reset an alarm in the PLC Slave 2 (containing only an alarm table.
I suppose I have to use an %MW-output in the first PLC to command a %MW-input in the second PLC but I don't now how to program the adresses in the both PLC's.
I use Vijeo Designer Lite and TwidoSuite as programming tools.
Thanks to help me
I use a Magelis XBT-N410 (master) to edit alarms from 2 Twido-PLC's (slave 1 and 2) in a Modbus-network. I use the [F1] function-button on the XBT-N410 to reset an alarm in the first PLC (slave 1 contains the dialog table and an alarm table). How can I use the same [F1] to reset an alarm in the PLC Slave 2 (containing only an alarm table.
I suppose I have to use an %MW-output in the first PLC to command a %MW-input in the second PLC but I don't now how to program the adresses in the both PLC's.
I use Vijeo Designer Lite and TwidoSuite as programming tools.
Thanks to help me