sandro.chiarle
Member
- Join Date
- Sep 2002
- Posts
- 3
Hi everybody
I'm in the mud for a really stupid situation.
I got every HW/SW device it is nedeed to program GE Fanuc series One Plcs (cpu 104)except a cord from the adaptor to the Cpu .
On the manual I have there are some wiring diagram and one sheet show
the configuration I have but in my opinion something doesn't sound good.
The wiring diagram for the cord shows two connectors for a round multiwires cable , but in the reality that one of the Plc Cpu side is a 25 wires flat cable female connector.
The diagram also shows some points to be connected with resistors
not telling the values.
Now it's not so easy here in Italy to have such a cord , in a reasonable time , because this PLC is considered little bit obsolete:so what I need is somebody to help me to work this problem out sending me the wiring specification to build it.
Reasuming: I have a Workmaster programmable control
the cord from the comm1 port to the adaptor
the adaptor itself
not the cord for the CPU
Can I run the Logicmaster 1 with a PC equipped with Windows ME ?
If yes, how could it be?
Thanks for any kind of helps
Sorry for my bad English
I'm in the mud for a really stupid situation.
I got every HW/SW device it is nedeed to program GE Fanuc series One Plcs (cpu 104)except a cord from the adaptor to the Cpu .
On the manual I have there are some wiring diagram and one sheet show
the configuration I have but in my opinion something doesn't sound good.
The wiring diagram for the cord shows two connectors for a round multiwires cable , but in the reality that one of the Plc Cpu side is a 25 wires flat cable female connector.
The diagram also shows some points to be connected with resistors
not telling the values.
Now it's not so easy here in Italy to have such a cord , in a reasonable time , because this PLC is considered little bit obsolete:so what I need is somebody to help me to work this problem out sending me the wiring specification to build it.
Reasuming: I have a Workmaster programmable control
the cord from the comm1 port to the adaptor
the adaptor itself
not the cord for the CPU
Can I run the Logicmaster 1 with a PC equipped with Windows ME ?
If yes, how could it be?
Thanks for any kind of helps
Sorry for my bad English