elevmike
Member
Ok so I have an application where I might need a servo or stepper (both of which I know exactly ZIP about). The application is low rpm to drive a timing belt at 1ft per sec. with about 30ftlbs of force. The other problem is space. The motor cant be more then 3-1/2 inches long from face to back. I looked at the AD stuff but not powerfull enough. The application is to open & close a sliding door for a demo unit where the installiation overhead is not high enough to accomidate our standard swing-arm door operators. I was hoping that somebody could point me to a good primer and some reccomended manufactures of steppers & drives.
Thanks,
Thanks,