I have an application using a SEW Movidrive to control a hoist (two motors mechanically linked). The drive has an ethernet interface (DFE13B) which is to be used to connect to a ControlLogix platform (L55 CPU). I'm using RSLogix5k v16.
I have tried to follow the Movidrive manual for "Configuring the master ethernet/IP scanner" but have been unsuccessful.
I need the basic control data (ref speed, up, down, start & stop) as well as reading back speed, position etc.
Can anyone point me in the right direction or better still, done an application like this?
I have tried to follow the Movidrive manual for "Configuring the master ethernet/IP scanner" but have been unsuccessful.
I need the basic control data (ref speed, up, down, start & stop) as well as reading back speed, position etc.
Can anyone point me in the right direction or better still, done an application like this?