YoungWint
Member
Hi All
I am putting together a largish project at present.
The client has requested two off Profibus networks and two off ethernet networks.
With this in mind I specified a Siemens CPU 319-3 with an additional CP 343-1.
Reading the spec it has a 2 port Profinet port, one I will use for HMI. What is the second port for as don't seem able to configure through Hardware Configuration.
Now questioning if need the additional card.
Any one used this before who can advise would be saviour.
I am putting together a largish project at present.
The client has requested two off Profibus networks and two off ethernet networks.
With this in mind I specified a Siemens CPU 319-3 with an additional CP 343-1.
Reading the spec it has a 2 port Profinet port, one I will use for HMI. What is the second port for as don't seem able to configure through Hardware Configuration.
Now questioning if need the additional card.
Any one used this before who can advise would be saviour.