FoolishMantle
Member
Hi
i Have an OP7 [6AV36071JC200AX1] and a CPU s7-315 DP [6ES73152AF020AB0]
I'm communicating between the two via DP, i need to set up the CPU so that if communications is lost between that and the OP the CPU will go into STOP mode
Theres the PG on the network PC with which im programming the CPU [using Step7 and DP communication cable], other than that its just the CPU and OP7 connected with a DP cable.
I've opened up Block OB87 but i dont know how to wirite the program etc
So,is there anyone who can shed any light on how to get the CPU to go into STOP, if the communication to the OP is lost?
Mant Thanks
i Have an OP7 [6AV36071JC200AX1] and a CPU s7-315 DP [6ES73152AF020AB0]
I'm communicating between the two via DP, i need to set up the CPU so that if communications is lost between that and the OP the CPU will go into STOP mode
Theres the PG on the network PC with which im programming the CPU [using Step7 and DP communication cable], other than that its just the CPU and OP7 connected with a DP cable.
I've opened up Block OB87 but i dont know how to wirite the program etc
So,is there anyone who can shed any light on how to get the CPU to go into STOP, if the communication to the OP is lost?
Mant Thanks