pong10 Member P Join Date Nov 2011 Location Cavite Posts 7 Sep 11, 2012 #1 Hello everyone, I have a new Siemens PC-adapter usb but doesn't work in accessible nodes. If i go to Set pg/pc interface pc adapter auto properties and start network detection it working. what are the possible problem? thank and advance
Hello everyone, I have a new Siemens PC-adapter usb but doesn't work in accessible nodes. If i go to Set pg/pc interface pc adapter auto properties and start network detection it working. what are the possible problem? thank and advance
KAJ Member K Join Date Sep 2012 Location Ohio Posts 15 Sep 12, 2012 #2 You must set to USB in Properties of the PG/PC interface.
pong10 Member OP P Join Date Nov 2011 Location Cavite Posts 7 Sep 13, 2012 #3 Thanks KAJ, Now is working, I need to select manually the SET PG/PC adapter either MPI or Profibus. I think my adapter is defective.
Thanks KAJ, Now is working, I need to select manually the SET PG/PC adapter either MPI or Profibus. I think my adapter is defective.