Hi everyone,
Anyone familiar with Siemens can help me on this :
I have 1 SM1232 Analog Output Card, output -10 to +10 VOltage.
I have 2 Analog output. 1 to 3 drives & 1 to Actuator. All device are 0 to 10V signal.
My first question is : what is the range for 0 to +10 ?? there is 1 drive I put 0 to 150,000 to read 0-460V on the Drive but I did not check on ANalog card VOltage out.
I use the same Function for 3 drive, 1 work well (0-150,000 ~ 0-460V) but the other two cannot get over 9500 (about 4 V when I read from drive) despite to whatever I put in.
Second question is: for the actuator, If i put in over 7000, red flashing light !!???
THanks
Anyone familiar with Siemens can help me on this :
I have 1 SM1232 Analog Output Card, output -10 to +10 VOltage.
I have 2 Analog output. 1 to 3 drives & 1 to Actuator. All device are 0 to 10V signal.
My first question is : what is the range for 0 to +10 ?? there is 1 drive I put 0 to 150,000 to read 0-460V on the Drive but I did not check on ANalog card VOltage out.
I use the same Function for 3 drive, 1 work well (0-150,000 ~ 0-460V) but the other two cannot get over 9500 (about 4 V when I read from drive) despite to whatever I put in.
Second question is: for the actuator, If i put in over 7000, red flashing light !!???
THanks