Mas01
Member
Anyone know how I can convert DTL to DATE type?
This rung is trying to determine if the system is in calibration by subtracting the current date (today's date) from the Next Calibration Due date.
If the result is TRUE, the cal is VALID. Otherwise, it is FALSE, cal is INVALID.
I've had a look at the CONV instruction, but Date/DTL is not in there.
See picture, thanks
This rung is trying to determine if the system is in calibration by subtracting the current date (today's date) from the Next Calibration Due date.
If the result is TRUE, the cal is VALID. Otherwise, it is FALSE, cal is INVALID.
I've had a look at the CONV instruction, but Date/DTL is not in there.
See picture, thanks
Last edited: