Mas01
Member
In a data block, if the tag is ticked in the "Retain" column", is it meant to be retained after cycling the power to the PLC?
I'm finding that, after cycling PLC power, the value reverts to the 'Start value'.
I want to retain the value after PLC has been power-cycled.
What's the correct way to do this?
Thanks in advance.
I'm finding that, after cycling PLC power, the value reverts to the 'Start value'.
I want to retain the value after PLC has been power-cycled.
What's the correct way to do this?
Thanks in advance.