Hi guys!
Ive got a problem with my Siemens Plc 300 station!
This is a my setup:
PS307 2A 307-IBA00-0AA0
CPU314 IFM 314-5AE03-0AB0 v1.0
CP342-5 342-5DA01-0XE0
And a Beckhoff BK3150 Profibus
With 8 digital inputs and 8 digital outputs.
And the beckhoff BK3150 uses the profibus adress 11.
I could get it to work with a other station that had the profibus module in the CPU, but now when its external i have communikation problems.
Ive tryed to make it work for a long time now, and were hoping som genious here could help me out!
Ive read on siemens support site, that i should use DP_SEND and DP_RECV
But i cant get it to work.
I tell the DP_send function to send the information to DB1
And the DP_RECV function to recv information from DB2.
And i was hoping someone could create a projekt with my hardware and make it to work and i look at that and see what i did wrong.
Ive got a problem with my Siemens Plc 300 station!
This is a my setup:
PS307 2A 307-IBA00-0AA0
CPU314 IFM 314-5AE03-0AB0 v1.0
CP342-5 342-5DA01-0XE0
And a Beckhoff BK3150 Profibus
With 8 digital inputs and 8 digital outputs.
And the beckhoff BK3150 uses the profibus adress 11.
I could get it to work with a other station that had the profibus module in the CPU, but now when its external i have communikation problems.
Ive tryed to make it work for a long time now, and were hoping som genious here could help me out!
Ive read on siemens support site, that i should use DP_SEND and DP_RECV
But i cant get it to work.
I tell the DP_send function to send the information to DB1
And the DP_RECV function to recv information from DB2.
And i was hoping someone could create a projekt with my hardware and make it to work and i look at that and see what i did wrong.
Last edited: