Syrio
Member
I have battled this. I found to change the appearance of a Symbol the Fill Style must be set to either Shaded or Solid. It cannot be Original.
Siemens Tia Portal HMI Help
- Thread starter toddp65
- Start date
Puddle
Member
I just had a look at the graphics in V15.1 and tried changing the colour of a pump, using a pump located in:
WinCC graphics folder > Equipment > Automation [EMF] > Pumps
Changing the colour changes the background colour, which is also set to transparent by default. There are six different colours of pump though, could the same visual be achieved by having two objects with the visibility toggled instead?
WinCC graphics folder > Equipment > Automation [EMF] > Pumps
Changing the colour changes the background colour, which is also set to transparent by default. There are six different colours of pump though, could the same visual be achieved by having two objects with the visibility toggled instead?
Similar Topics
Hello, good morning, I have been having two problems with the Tia Portal software.
The first is that I have installed it on my computer and...
I am currently am in a PLC class and need urgent help on how the ladder logic would be laid out. I understand how to get the traffic lights to...
Hello,
If the date on the license manager of tia Portal has expired, can I still work with it? or is this just to keep the program up to date...
Hi everyone
I've created an FC that includes the blocks TCON, TDISCON, TSEND and TRCV.
This block has to be as generic as possible across...
Hello, i can find the CPU when searching for it. But when I go Online i just get the icon for "Not compatible" everywhere. I get no additional...