Hi all.
I am using a TP177 Micro and would like to know if there is anyway in which I can change the current active screen from the PLC.
I am used to using Mitsubishi (Beijer) and also Proface HMI and in these I am able to assign a memory location that I can write an integer number to for the current screen to change.
I can also look at another location on these screens for the current screen number.
I am using WinCC Flexible 2005 Advanced and cannot find any information on a function like this. The screen is connectd to a S7-200 PLC.
Thanks in advance
Jonathan Davies
I am using a TP177 Micro and would like to know if there is anyway in which I can change the current active screen from the PLC.
I am used to using Mitsubishi (Beijer) and also Proface HMI and in these I am able to assign a memory location that I can write an integer number to for the current screen to change.
I can also look at another location on these screens for the current screen number.
I am using WinCC Flexible 2005 Advanced and cannot find any information on a function like this. The screen is connectd to a S7-200 PLC.
Thanks in advance
Jonathan Davies