Dear All,
please help me solving this problem,
i have 2 server (redundant / Windows XP SP 3 version 2002) connected to two HMI 1 & 2 {SIMATIC WinCC V 7 / both are server / "not redundant"}
both HMI 1 & HMI 2 are the same.
the problem is, during the commissioning both HMI 1 & 2 open on screen X in Run time & working fine but Surpriselly, HMI 1 showing a group of dynamised line in Green color and HMI 2 showing the same line with white color.
can you please help me, the SW Config. is ok
thanks
please help me solving this problem,
i have 2 server (redundant / Windows XP SP 3 version 2002) connected to two HMI 1 & 2 {SIMATIC WinCC V 7 / both are server / "not redundant"}
both HMI 1 & HMI 2 are the same.
the problem is, during the commissioning both HMI 1 & 2 open on screen X in Run time & working fine but Surpriselly, HMI 1 showing a group of dynamised line in Green color and HMI 2 showing the same line with white color.
can you please help me, the SW Config. is ok
thanks