I have a SLC 5/02 PLC in my office that I use to play around with
(beginner)I have been useing this PLC for some time, Im using the 1747-UIC converter, today I was hooked up and doing a few things and got called away for about 1 hour, came back and my laptop had lost communciation with the processor, when I tried to go back online I could not,I checked rslinx and I could see the UIC and the 5/02
tried to go online and there was no communication, I shut down my lap top and rebooted, tried communication again and the processor was faulted out, I was able to regain communication,but the program was gone from the processor, I had to do a download, I checked the fault and it says
A :stuck: runtime error is detected on I/O module, exact slot cannot be determinded, when I clear the fault the processor goes back to remote program, try to put into run and the fault comes back, can anyone tell me how I can solve this problem
Thank you
(beginner)I have been useing this PLC for some time, Im using the 1747-UIC converter, today I was hooked up and doing a few things and got called away for about 1 hour, came back and my laptop had lost communciation with the processor, when I tried to go back online I could not,I checked rslinx and I could see the UIC and the 5/02
tried to go online and there was no communication, I shut down my lap top and rebooted, tried communication again and the processor was faulted out, I was able to regain communication,but the program was gone from the processor, I had to do a download, I checked the fault and it says
A :stuck: runtime error is detected on I/O module, exact slot cannot be determinded, when I clear the fault the processor goes back to remote program, try to put into run and the fault comes back, can anyone tell me how I can solve this problem
Thank you