I have 4 outputs which cycle off-back on, one at a time if more than 1 output shuts off I need to set an alarm I`m wanting to use the compute instruction to send to a GEQ instruction can this be done with integers?
Yes, but because you only have 4 bits to check, proably the easiest is the brute-force method of checking all 6 possible combinations of 4 bits taken 2 at a time, to find if more than 1 are off.
Thanks for answering! I started to make one of these but didn finish I was also thinking of adding them all together, but I agree that the Compute overcomplicates.