still stuck in hsc

juan

Member
J
Join Date
Apr 2003
Posts
50
We are using a S7-200 and are writing in Microwin.To use the hsc counters we initialise the SMB47(hsc 1) at value F8. In our interrupt we write C0 and increase the preset value each time with 4.We do the same for the other direction but now we are writing -4; its working but we have a little time delay while we are counting. Is there anybody who knows this problem or is there anybody who can help??

Juan
 

Similar Topics

S
Still a little stuck (Stepper module)
Stepper Module 1746-hstp1 I have read the module on this thing a couple times now. I am still not quite confident that I am understanding...
Replies
3
Views
1,175
jimtech67
jimtech67
N
Still stuck and cant connect slc 500 5/04
I dont know what im doing wrong here but ive tried everything and rslinx wont show our slc 500. As of my last post yesterday i did get the info...
Replies
2
Views
5,200
TimWilborne
TimWilborne
G
Why is the configuration IP different from the actual IP address still able to run no
Why is the configuration IP different from the actual IP address still able to run normally?
Replies
6
Views
833
glass123
G
T
Any free-of-charge univeral HART DTM still out there?
Just started working with some HART loops and I'm trying out Pactware.I'm using Krohne and it works just fine recognizing my modem. I downloaded...
Replies
9
Views
1,372
AlfredoQuintero
A
C
History - Power Monitoring - while I still remember
Square D had a group that wanted to develop PLC compatible power monitoring. They worked out of the Cedar Rapids circuit breaker plant - before...
Replies
0
Views
827
Corsair
C
Back
Top Bottom