Infantry Dave
Member
Good Morning Everybody,
I'm using RSLogix500 and programming a Micrologix 1100.
I define all my outputs using B3 data file and reference those bits as outputs through out the program.
However, when I provide an OTE for these bits, (most are in subroutines, JSR'd from the main file, with no conditions for the jump), the program will not write a 1 to that slot and subsequently no output when the conditions are true.
I currently have no latching or unlatching function related to these bits, and checked the code line by line.
Am I missing a property or setting some where. Also, some B3 bits do work.
I'm stumped.
I'm using RSLogix500 and programming a Micrologix 1100.
I define all my outputs using B3 data file and reference those bits as outputs through out the program.
However, when I provide an OTE for these bits, (most are in subroutines, JSR'd from the main file, with no conditions for the jump), the program will not write a 1 to that slot and subsequently no output when the conditions are true.
I currently have no latching or unlatching function related to these bits, and checked the code line by line.
Am I missing a property or setting some where. Also, some B3 bits do work.
I'm stumped.