Suggestions for DIN rail mount DPDT switch

danw

Lifetime Supporting Member
danw
Join Date
Oct 2004
Location
midwest, USA
Posts
3,427
I need several DPDT switches to switch twisted pair, shielded RS485 comm cable between a PC (for setup) and the master (an HMI)

I want to bury the switches inside the panel. Any suggestions for a suitable switch? DIN rail mount?

Dan
 
I would use IDEC (IZUMI) standard 22.5mm switches for this and mount them in a Telemecanique DIN rail pushbutton holder catalogue number 15151. I use these things all the time - marvellous device.
 

Similar Topics

H
PLC NAT Suggestions.
I know this topic has been brought up a few times, but i had some specific questions. I have installed several 1783-NATR devices and they have...
Replies
6
Views
311
Cheeseface
C
CEI_Josh
Suggestions for upcoming project
I'd like people's opinions on which manufacturer of hardware they prefer. We are an aerospace manufacturing facility that does little to no SCADA...
Replies
10
Views
532
CEI_Josh
CEI_Josh
M
Suggestions for PID control
I am setting up control for Hypochlorite dosing. The easy part is the dosing calculation for flow pacing but I would also like to setup trimming...
Replies
8
Views
948
mhump711
M
K
Industrial Display Suggestions (-40 C Storage)
I'm working on an application and have hit a bit of a snag. I need to find an industrial touchscreen display that can: - Tolerate down to -40C...
Replies
7
Views
758
Circiter
C
B
Issues with PLC 5/40E Boot-Up - Need Suggestions
Hello Everyone, I am reaching out to this knowledgeable community with a peculiar problem I've been experiencing with a PLC 5/40E. This issue has...
2
Replies
16
Views
2,279
TheWaterboy
TheWaterboy
Back
Top Bottom