Symbol MS3204 2D Barcode Scanner - Omron CP1H

donl517

Member
donl517
Join Date
Dec 2005
Location
Michigan
Posts
127
Anyone worked with this combination before? I bought the cable for SSI communication and I guess should have gotten the trigger cable instead. Anybody used one of these with SSI successfully? I don't quite grasp the concept of SSI. I made a cable adapter suggested by tech support at Symbol but it isn't triggering the scanner. Anybody with a sample program, it would be greatly appreciated.

Thanks for any help,
Don
 

Similar Topics

B
Wonderware Application Warning symbol
Hello everyone, Recently, my Archestra IDE shut down while I was editing. After restarting the IDE, I noticed warning symbols under my opened...
Replies
1
Views
104
TheColt46
T
S
WinCC Unified - Flashing button/symbol if alarm active
I was looking for this function, so that i doesn´t need to do it in the PLC. If there are an alarm in the alarm list, i want to flash the...
Replies
2
Views
538
swedeleaner
S
H
What is this symbol on a plc schematic?
Hello, fairly new to plcs I’m tasked with installing a PE to a micrologix1200, in the attached picture I/14 is the PE I’m installing it’s going to...
Replies
6
Views
953
I_Automation
I_Automation
S
Tia Portal Wincc Symbol without scroll down bar.
Hello Thank you all for your support. I am actually experience same issues with TIA portal V17 update5 as well as V18. The problem is with the...
Replies
0
Views
807
SaadAlbehige
S
S
# symbol in structured text of Beckhoff TwinCAT
Hi all, I've inherited someone else's program and can't for the life of me figure out his use of the # symbol in one of his structured text...
Replies
5
Views
1,924
sallysan
S
Back
Top Bottom