TEST AND ADDRESSING OF MODULE 6es54657la13 IN S5
- Thread starter coudet
- Start date
Similar Topics
I am using the latest version of Crimson 3.0 connected to a Allen Bradley ML1400 and can not seem to address a B3 word to the bit level. I have...
Hi,
I am using M221 reading from 3 different sensors (modbus rs485) sharing same bus (daisy chain). I am currently using READ_VAR (in total...
I am trying motor startup with pf525 drive by using wizard start over ethernet communication but during direction test it's showing control error...
See code at the bottom.
Hi all.
For the story, this is my first complete project using a Rockwell PLC, I've been mostly working with Unity Pro...
My question is regarding the number of Test outputs vs the number of inputs in a module.
In the case of a 1734-IB8S card, there are 4 test...