TesysT over ethernet

Steve_D

Member
S
Join Date
Jul 2002
Location
Albury/Wodonga
Posts
92
Schnieder have bought out a all encompassing DOL motor starter/monitor...the TesysT range. I have a Premium PLC running unity and have set up an IO scanner in my ethernet card. My issue is I cant see how to adress the words in my TesysT unit, how many words in and out and what data is allocated to those words. If I knew what data was where I need just scan the IP adress and suck em out. I have the power suite software which lets me do everything but allocate the words. Can any one point me to some usefull doco or example projects?
 

Similar Topics

A
Schneider LTMR (TesysT) w/ Logix 5000
Does anyone have experience using these things? Can't get it to work for the life of me. I've used the Schneider cable to set the IP and I can...
Replies
9
Views
2,302
AMarks95
A
K
Logicbuilder with HMISCU & TesysT
Hello all, This is my first time for using HMISCU, but I have some problems during programming. How can I transfer Embedded IO of HMISCU to...
Replies
0
Views
974
kenny2c
K
A
reading data from siemens controller (profinet) to ethernet/IP controller
Hello I have a s7-1200 and I would like to read the tags present in this controller with my controllogix controller. The two controllers don't use...
Replies
5
Views
159
bkottaras
B
K
use Simotion D ethernet port as gate to access S7-1500 plc program
Can we use a Simotion D455 ethernet port x127 as a gate, to access S7-1500 plc Tia Portal program ? In the Simatic manager, we used Netpro to do...
Replies
2
Views
89
mk42
M
S
Powerflex 755 - Hardwired & Ethernet in Parallel
So I have a sort of unique situation where I'm wanting to run a PF755 from the IO and over ethernet. Of course, this comes with it's own set of...
Replies
9
Views
275
sparkie
S
Back
Top Bottom