TIA HMI command line

Hi guys, I have one dditional question to this. When I tag this string to hmi, then, when I try to insert a word and hit enter in simulation, it doesnt write this value to the string. Anybody knows what I am doing wrong please?
 

Similar Topics

S
TIA-portal - Adding connection to HMI in a different project
Hello all! So I have one project with a S7-1214 and a MTP1500 "Project1" and one project with another S7-1214 "Project2". Both of these PLC:s need...
Replies
0
Views
1
swedeleaner
S
S
Tia portal hmi graphics
Hi guys I after a bit of advice on Tia portal graphics, I would like to add a conveyor belt graphic to a hmi and the conveyor in the basic...
Replies
3
Views
198
mk42
M
A
Tia portal v18 HMI simulation
hello every one. i'm new to tiaportal, i have created new project and HMI screen the program works fine with PLC-sim, but when i try to cntrol the...
Replies
9
Views
423
Abouda
A
Mas01
S7 TIA Portal v18: Does TIA Portal have a built-in HMI simulator?
My PLC (S7-1200) and HMI (KTP-1200 Basic) has been delivered on-site to the customer. To be able to do "off-line" updates to the code, I am using...
Replies
4
Views
227
Mas01
Mas01
Mas01
S7/TIA Portal: HMI KTP1200 "Virtual Keypad is too small" says operator...
...and I agree. Context: TIA Portal/HMI = KTP1200 (12" screen) In the attached redacted image, the values in the white boxes are entered by the...
Replies
10
Views
725
mk42
M
Back
Top Bottom