Charles7111
Member
I am writing a program for a training course to use floats to control the inlet and outlet valves on a water tank. I've got the program done to use the floats to open and close the valves, but I need to figure out how to write in a toggle feature to be able to switch from the floats doing the work to a DP. There will be two buttons on the HMI to accomplish this, but I know there is a lot more in the ladder logic that needs to be added. Any help would be appreciated. Programming system GE Proficy 7.0, GE VersaMax Nano/Micro PLC, and GE view panel HMI.