Iam having problems transfering program from my laptop to a TP170A HMI
The laptop is running ProTool/Pro CS V6.0 SP3, over RS232 cable .
But when i try to transfer i get an error message " Could not establish connection” although I checked all the setting nothing find wrong, need your help, advice and input to resolve this problem. Thank you
VITAL99
The laptop is running ProTool/Pro CS V6.0 SP3, over RS232 cable .
But when i try to transfer i get an error message " Could not establish connection” although I checked all the setting nothing find wrong, need your help, advice and input to resolve this problem. Thank you
VITAL99