jugenzhu1963
Member
Hi everybody
When i try to upload project from siemens tp270, i got this message "could not find the pdz file" and the process is aborted. The tp 270 is connected to the profibus on which there are one 313c-2dp cpu and one et200s remote i/o. The nod address of tp270 is 1. i set up the upload setting to "mpi/profibus". i use 5512 card on my laptop with windows xp. i can communicate with plc. somebody knows the means of "pdz file" and how i sould do.
thanks lots
When i try to upload project from siemens tp270, i got this message "could not find the pdz file" and the process is aborted. The tp 270 is connected to the profibus on which there are one 313c-2dp cpu and one et200s remote i/o. The nod address of tp270 is 1. i set up the upload setting to "mpi/profibus". i use 5512 card on my laptop with windows xp. i can communicate with plc. somebody knows the means of "pdz file" and how i sould do.
thanks lots