bellebasaur
Member
I'm new to TRIO line of controllers, only used mitsubishi PLCs before.
I have this MC206X controller which refused to accept connection via USB while it was inside the machine. It was giving me "usb device descriptor failure" and didn't recognise the TRIO driver.
I took it out and back to the office, and it connects just fine now with only power input.
The unit is using Serial B port to a HMI, standard I/Os, analogue outputs and 3 servos connected. I suspected the other serial connection and unplugged it initially. Still couldn't connect.
I'm stumped. I can modify the program now, but i'd really like to plug in and monitor it while the machine is in operation.
Anyone with experience with TRIO controllers and monitoring mode?
I have this MC206X controller which refused to accept connection via USB while it was inside the machine. It was giving me "usb device descriptor failure" and didn't recognise the TRIO driver.
I took it out and back to the office, and it connects just fine now with only power input.
The unit is using Serial B port to a HMI, standard I/Os, analogue outputs and 3 servos connected. I suspected the other serial connection and unplugged it initially. Still couldn't connect.
I'm stumped. I can modify the program now, but i'd really like to plug in and monitor it while the machine is in operation.
Anyone with experience with TRIO controllers and monitoring mode?