hello all i'm new to the site and looking for some help... i have a slc 504 controller and i'm trying to connect using a null modem cable throught he rs 232 port on the controller. the pin out is correct and i can't establish communications in RS linx. i get a packet timeout when i try the autoconfig... there is a panelview networked through the rs232 port that i am trying to program through that i unplug while trying to connect. when that port is used to connect to a panelview is it set up as a printer port? i also have the 8 pin din connector but i can't find a part number to purchase the correct cable to use that port...
thanks for any help gentlemen
thanks for any help gentlemen