Hi!
I've got a problem.
There is a direct link method of communication between 2 Quantum PLCs.
PLC1 HEX word to PLC2 - OK, i.e. converting from word to bits in PLC2 is do right.
PLC2 HEX word to PLC1 - NOT OK,i.e. converting from word to bits in PLC1 is do wrong. Let me explain. There is a HEX word (for example 16#0002) on the input of the *WORD TO BIT* block, but there are NO active outputs of the block.
The configuration of *peer cop* of the both PLCs is equal.
Would you please tell me how can I solve this problem.
Thanks in advance.
Ilya Ragazinsky.
I've got a problem.
There is a direct link method of communication between 2 Quantum PLCs.
PLC1 HEX word to PLC2 - OK, i.e. converting from word to bits in PLC2 is do right.
PLC2 HEX word to PLC1 - NOT OK,i.e. converting from word to bits in PLC1 is do wrong. Let me explain. There is a HEX word (for example 16#0002) on the input of the *WORD TO BIT* block, but there are NO active outputs of the block.
The configuration of *peer cop* of the both PLCs is equal.
Would you please tell me how can I solve this problem.
Thanks in advance.
Ilya Ragazinsky.