Hello,
There is a small test rig in our work which is sometimes salvaged for parts. The test rig is connected to a small robot used for training. All of this is unconnected from the process line/plant network. Someone has taken some of the modules from the 1734 AENT leaving empty spaces.
The module is kicking up errors due to the missing nodes, I’m wondering if there is a way to ‘skip’ the blank nodes, as these are not used.
I have tried to inhibit the none used nodes but to no avail.
Any help would be great! Thanks.
There is a small test rig in our work which is sometimes salvaged for parts. The test rig is connected to a small robot used for training. All of this is unconnected from the process line/plant network. Someone has taken some of the modules from the 1734 AENT leaving empty spaces.
The module is kicking up errors due to the missing nodes, I’m wondering if there is a way to ‘skip’ the blank nodes, as these are not used.
I have tried to inhibit the none used nodes but to no avail.
Any help would be great! Thanks.