Hello guys,
I have to send some Digital output from DCS ( ADV869 ) to control a valve open / close.
The valve actuator diagram is Emerson M2cp.
http://www2.emersonprocess.com/sitea...g/M2CP-109.pdf
I know ADV869 has transistors contract as output, I was thinking to put sthg between the ADV869 and the actuator to handle the 115V..
any suggestions please
Thank you
I have to send some Digital output from DCS ( ADV869 ) to control a valve open / close.
The valve actuator diagram is Emerson M2cp.
http://www2.emersonprocess.com/sitea...g/M2CP-109.pdf
I know ADV869 has transistors contract as output, I was thinking to put sthg between the ADV869 and the actuator to handle the 115V..
any suggestions please
Thank you